from nesting birds.
Examples of BirdBlocker installations
Examples of BirdBlocker installations
BirdBlocker – Installation without screwing, drilling or gluing.
It is important that the BirdBlocker strips are installed all the way around the solar system and that the BirdBlocker needles are firmly positioned on the roof surface. Module frames that have a flat inner profile with a frame thickness of 1,2 - 2mm are suitable, to which the BirdBlocker strips can be easily and permanently mounted using the stainless steel fastening clips.
Example BirdBlocker projects with 10cm and 12,5cm long needles:
Example projects with the BirdBlocker with 20cm long needles:
Generally please note:
The respective BirdBlocker installation instructions must always be observed. The BirdBlocker should only be installed by specialists with experience in installing PV systems on roofs. It is important that the installation is closed all the way round and that the needles of the BirdBlocker are stable on the roof surface so that there is resistance.
The owner and user must check the suitability of their solar system for the intended purpose. BirdBlocker is not 100% protection against birds building nests or against other animals under the solar system. However, due to its design, BirdBlocker greatly disturbs and hinders birds and other animals from accessing the system. BirdBlocker works best as a preventative measure to prevent bird nuisance.
The fitter carrying out the work is responsible not only for the correct installation, but also for the roof and the solar system on which he is installing. The installation instructions do not release the company carrying out the work from the obligation to clarify in advance the possible uses and applications of our products in connection with the other materials and products used on the individual object. If technical details are not described separately, this does not release the company carrying out the work from the obligation to examine the individual case and clarify the technically correct facts beforehand.
Before installing the BirdBlocker, old nests and other dirt should be removed from under the solar system.
DO NOT install the BirdBlocker during the breeding season. Birds will do everything they can to get under the solar panels because of their urge to nest. If there are nests with eggs or young birds, the relevant animal protection laws must be observed and the veterinary office may need to be contacted in advance. In several countries, it is even a criminal offense to disturb the birds during the breeding season.
Before installation, the specialist company responsible for the installation must ensure that the installation is carried out strictly in accordance with national and site-specific building regulations, occupational safety and accident prevention regulations.
rules, standards and environmental protection regulations. Every person who installs the BirdBlocker is obliged to inform themselves about all rules and regulations for technically correct planning and installation and to comply with these during installation. This also includes obtaining the latest status of the rules and regulations.
RoofTech GmbH and BirdBlocker generally do not assume any responsibility for suitability, effectiveness, installation and correct use.
The respective product assembly instructions as well as our general assembly instructions must be observed. Our documents and the individual assembly instructions for our products can be downloaded on the respective page and above under DownloadsWe would be happy to send you the information you require. We look forward to your message or call.
If our assembly instructions are not followed, if our products are installed or assembled with competitor components or if other components not purchased from us are used or combined, we accept no liability for any resulting defects or damage. The warranty is excluded in this respect.
The suitability of our products for the intended purpose is checked by the planner and user themselves. RoofTech GmbH and the producers of our distributed products do not accept any responsibility for installation, suitability and applications, nor any further liability.
No liability for printing or typographical errors. Technical changes reserved. We accept no liability for errors on our homepage and in our documents. Descriptions, images and drawings may represent stages of development that are not available in this form. The information provided in our documents and on our homepage and the drawings and photos shown serve to clarify individual details and are merely recommendations. RoofTech GmbH and our producers accept no liability whatsoever for this.
The contents of the RoofTech website and our documents (text, images, logos, drawings, trademarks and other data) are protected by copyright. The contents of this website and our documents may not be copied, distributed, modified or made available to third parties for commercial purposes. Any content on our homepage and our documents may only be used or passed on with the agreement and consent of RoofTech GmbH!
Linking external websites to the RoofTech website is only permitted with the consent of RoofTech GmbH and if no rights of RoofTech GmbH are violated.
S‑5!® products are protected by international patents of Metal Roof Innovations Ltd. For the use of all data and documents from S‑5! Metal Roof Innovations Ltd. please observe the S‑5! Terms of Use (=> direct link to S‑5! Terms of Use). Please also note the protective rights and copyright notices of our other producers and suppliers.
The business relationship is subject to German law, excluding the UN Convention on Contracts for the International Sale of Goods (CISG). Our General Terms and Conditions (GTC) apply, which we are happy to make available to you at any time (=> direct link to the general terms and conditions of RoofTech GmbH). Sales are generally only made to entrepreneurs (§ 14 BGB – commercial users).
© Copyright RoofTech GmbH, 02–2025. All rights reserved.
